INFLUENCE OF CYCLONE DESIGN ON THE SEPARATION OF VARIOUS PARTICLES
Keywords:
Cyclone, modelling, design, separation, efficiency, speedAbstract
This research focuses on creating a multi-objective optimization for cyclones to reduce the impact of fine particulate matter on the human body. For this purpose, three main materials were used: sand, wood particles, and ash. Cyclone modeling was considered to generate conditions for creating a model with various parameters such as diameter, length, swirling velocity, separation of different particles, suction velocity, etc.
These three materials were specifically chosen for investigation because they contain particles smaller than 5 μm, which deserve special attention as they are finer and affect human health.
Observations show that in models designed with Solidworks, the model's efficiency for the specified materials is reduced.
The percentage of unseparated particles increases, specifically those over 10%. In field studies, the efficiency of the respective cyclone design must be above 90% for the model to be considered adequate.
The subject of the research is the influence of various structural parameters and elements of the cyclone on particle separation efficiency.
The object of the research is cyclones as devices for separating two-phase gas-dust flows.
The aim of the article is to analyze and summarize the key constructive characteristics of cyclones. To achieve this goal, the following tasks were completed: explaining the basic principles of cyclone operation, including the role of centrifugal forces and the formation of secondary flows; identifying and detailing the key constructive elements of the cyclone; analyzing their individual influence on separation efficiency for different particle sizes; summarizing the achieved research results; and proposing guidelines for future developments in cyclone design for more effective separation of gas-dust flows.
Experimental studies were conducted with the aim of simulating aerodynamic flows and particle trajectories in the cyclone under different structural parameters.
Combined methods were used.
The results account for the efficiency of the cyclone model for each investigated material.
This allows for the evaluation of the design under the respective experimental conditions.
In conclusion, we can note that a universal separation design may not be equally effective for all types of materials.
References
De Oliveira, A. E., & Guerra, V., G. (2021). Electrostatic precipitation of nanoparticles and submicron particles: review of technological strategies, Process Safety and Environmental Protection, Volume 153, (2021), Pages 422-438, ISSN 0957-5820, https://doi.org/10.1016/j.psep.2021.07.043.
Diao, Y., & Yang, H. (2021). Gas-cleaning technology //Industrial Ventilation Design Guidebook. Elsevier, 279-371. doi :10.1016/B978-0-12-816673-4.00007-9.
Jiang, Z., Liang, Y., Zhu, S., Zheng, K., Zhu, Y., Yang, D., Wang, H., & Fu, P. (2025). Hydrogen production by suspension self-rotation enhanced pyrolysis of sludge particles in cyclone, Water Research, Volume 275, (2025), 123198, ISSN 0043-1354, https://doi.org/10.1016/j.watres. (2025).123198.
Mazyan, W., Ahmadi, A., Ahmed, H., & Hoorfar, M. (2017). Enhancement of solid particle separation efficiency in gas cyclones using electro-hydrodynamic method // Sep. Purif. J. 182 (2017) 29–35.
Mazyan, W., Ahmadi, A., Jesus, R., D., Ahmed, H., & Hoorfar, M. (2016). Use of ferrous powder for increasing the efficiency of solid particle filtration in natural gas cyclones / // Sep. Sci. Technol. (2016). 51. Р. 2098 – 2104.
Pandey, S., Wasilewski, M., Mukhopadhyay, A., Prakash, O., Ahmad, A., & Brar, L. S. (2024). Multi-Objective Optimization of Cyclone Separators Based on Geometrical Parameters for Performance Enhancement / Journals /Applied Sciences /Volume 14 /Issue 5 / (2024) 10.3390/app14052034.
Svoboda, J., Coetzee, C., & Campbell, Q. (1998). Experimental investigation into the application of a magnetic cyclone for dense medium separation // Minerals Eng. (1998).11. Р. 501 – 509.
Siadaty, M., Kheradmand, S., & Ghadiri, F. (2017). Improvement of the cyclone separation efficiency with a magnetic field / // Journal of Aerosol Science. December (2017). Vol. 114. P. 219 – 232.
Yang. K., & Yoshida, H. (2004). Effect of mist injection position on particle separation performance of cyclone
scrubber / Sep. Purif. Technol. 37 (2004) 221–230.
Yoshida, Y., Hayase, K., Fukui, K., & Yamamoto, T. (2012). Effect of conical length on separation performance of sub-micron particles by electrical hydro-cyclone / Powder Technol. 219 (2012) 29–36.
Zinurov, V., Kharkov, V., Pankratov, E., & Dmitriev, A. (2022). Numerical Study of Vortex Flow in a Classifier with Coaxial Tubes. Int. J. Eng. Technol. Innov., 12, (4), 336-346. doi : 10.46604/ijeti.2022.9568.
